Clock in/out on your phone
Last updated
Last updated
Go to “Stamp Clock” in the menu. This can only be seen on your mobile phone when you are scheduled on an assignment that uses mobile stamping.
Press the green button to start your time
Press the red button to stop
NOTE! You have to allow “show location” (GPS) on your phone to be able to use this function.
If you have clocked in you can only choose to clock out and vice versa. At least one minute has to pass between clocking in and clocking out.
You can only start and stop the registration within a defined zone, set by your employer. The size of the zone varies between locations, but is at the address for the assigned workplace. If you are outside the zone you will get a warning and have to try again, closer to the work location.
Your stamped times are shown below your schedule so you can see when you did what (4).
Note! How exact your position is varies depending on your model of smartphone, due to their different abilities to process GPS-information.
If you forget to clock out, you need to make sure that the time gets edited. If you are able to edit your time manually, you can do so under “Calendar” in the menu. Otherwise you have to contact an administrator for help.
