Clock in/out on your phone

Clock in/out

1. Go to “Stamp Clock” in the menu. This can only be seen on your mobile phone when you are scheduled on an assignment that uses mobile stamping.

2. Press the green button to start your time

3. Press the red button to stop

NOTE! You have to allow “show location” (GPS) on your phone to be able to use this function.

If you have clocked in you can only choose to clock out and vice versa. At least one minute has to pass between clocking in and clocking out.

You can only start and stop the registration within a defined zone, set by your employer. The size of the zone varies between locations, but is at the address for the assigned workplace. If you are outside of the zone you will get a warning and have to try again, closer to the work location.

Your stamped times are shown below your schedule so you can see when you did what (4).

Note! How exact your position is varies depending on your model of smartphone, due to their different abilities to process GPS-information.

Edit registration

If you forget to clock out, you need to make sure the time gets edited. If you are able to edit your time manually, you can do so under “Calendar” in the menu. Otherwise you have to contact an administrator for help.